MP2310iec

MP2310iec

MP2310iec

MP2310iec - YAIMOB

Up to 16 Axes

The MP2310iec is a multi-axes controller offering:

IEC61131-3 and PLCopen programming standards
MECHATROLINK-II as the motion network
3 slots for option modules
4, 8 or 16 motion axes

TemplateWeb

Application Information

Sort by :

Login to view all content that is available based on your partner settings.

Showing 16 to 20 of 45 entries.

Previous Page
Page1
Page2
Page3
Page4
Page5
Intermediate Pages
- Page6
- Page7
- Page8
Page9
Next Page

Title/Number	File(s)	Rev Date
AN.MPIEC.06 MPiec Controllers Communicating Serially with VFDs AN.MPIEC.06 1.1MB Rev Date:12/18/2013 Description: This application note describes a way to set up an MPiec controller to communicate with multiple VFDs serially. The set up involves a Moxa MGate MB3170 module which converts Modbus/TCP to Modbus RTU. The MPiec controller is configured to send Modbus packets to specific VFDs (slaves) which have unique slave IDs through the Moxa MGate MB3170 module which is configured as an RTU slave. The serial interface on the serial port of the MB3170 module is configured for RS-485 2-wire. Rev Number: Language: English Product Group: Controllers Product Line: MP2300Siec, MP2310iec, MP2600iec, MP3200iec Doc Type: Application Documents Doc SubType: Application Note Share \| Rate Rate this article :	1.1MB	12/18/2013
Configuring an MPiec Series Controller to connect to a VIPA bus coupler AN.MPIEC.07 825KB Rev Date:10/07/2014 Description: This application note shows how to,configure an MPiec controller to connect with a VIPA bus coupler via EtherNet/IP Rev Number: rev c Language: English Product Group: Controllers Product Line: MotionWorks IEC, MP2000iec Series, MP2300Siec, MP2310iec, MP2600iec, MP3200iec Doc Type: Application Documents Doc SubType: Application Note Share \| Rate Rate this article :	825KB	10/07/2014
Configuring an MPiec controller to communicate with a Phoenix Ethernet/IP bus coupler via EtherNet/IP AN.MPIEC.08 2.0MB Rev Date:12/18/2013 Description: Rev Number: Language: English Product Group: Controllers Product Line: MotionWorks IEC, MP2000iec Series, MP2300Siec, MP2310iec, MP2600iec, MP3200iec Doc Type: Application Documents Doc SubType: Application Note Share \| Rate Rate this article :	2.0MB	12/18/2013
Application Note: MPiec - Configuring a Yaskawa Mechatrolink VFD for the MP2300Siec AN.MPIEC.09 404KB Rev Date:02/05/2015 Description: This document describes how to configure a Yaskawa VFD with a Mechatrolink communications card to operate with an MP2300Siec motion controller. Rev Number: 1.7 Language: English Product Group: Controllers Product Line: MotionWorks IEC, MP2000iec Series, MP2300Siec, MP2310iec Doc Type: Application Documents, Technical Documents Doc SubType: Application Note, Technical Procedures Share \| Rate Rate this article :	404KB	02/05/2015
Application Note: MPiec Series Controller - Configuring an Exor UniOP HMI using JMobile software to communicate with an MPiec Series Controller via Modbus TCP AN.MPIEC.10 480KB Rev Date:02/19/2014 Description: Steps for configuring an Exor UniOP HMI using JMobile software to operate as a Modbus TCP master communicating with an MPiec Series Controller configured as a slave. Rev Number: Language: English Product Group: Controllers Product Line: MotionWorks IEC, MP2000iec Series, MP2300Siec, MP2310iec, MP2600iec, MP3200iec Doc Type: Application Documents Doc SubType: Application Note Share \| Rate Rate this article :	480KB	02/19/2014

Showing 16 to 20 of 45 entries.

Previous Page
Page1
Page2
Page3
Page4
Page5
Intermediate Pages
- Page6
- Page7
- Page8
Page9
Next Page

Node: dxpprd02:8080

Share

|

Rating