The SGMCS servomotor line is designed for direct drive applications where the load is directly attached to the motor surface. Pre-tapped mounting holes and a hollow-through shaft permit a variety of machine designs. This direct drive motor has substantial load carrying bearings, low speed windings, and 1,048,576 ppr absolute encoders. 200 volt windings are available with maximum speeds up to 500 rpm. There are 17 sizes available with up to 5,310 lb-in (600 Nm) of peak torque.
Holding Brake Wiring Warning
Rev Date:11/20/2008
Sigma II Servo System SGDM User's Manual
Rev Date:07/09/2010
Sigma-5 User Manual: Setup for Rotary Motors
Rev Date:01/24/2020
Sigma-5 User Manual: Design and Maintenance - Rotary Motors - Analog Voltage and Pulse Train Reference
Rev Date:03/19/2020
Sigma-5 User Manual: Design and Maintenance - Rotary Motors - MECHATROLINK-II Communications Reference
Sigma-5 User Manual: Design and Maintenance - Rotary Motors - Option Command Reference
Sigma-7 with 200V Input Peripheral Device Selection Manual
Rev Date:02/21/2020
Sigma-7 Direct Drive Servomotor Product Manual
Rev Date:12/20/2020
AC SERVOMOTOR SAFETY Precautions (UMN-0292)
Rev Date:10/18/2019
SAFETY PRECAUTIONS: Guide to Handling Direct Drive Servomotors (UMN-0291)
Rev Date:02/22/2017
